<em id="hbbkid930"><legend id="nkhbgn940"></legend></em><th id="gcneho538"></th><font id="reicre501"></font>
  • <kbd id="xozkzz241"><ol id="hujmrs495"></ol><button id="dkcyyw986"></button><legend id="mjiant096"></legend></kbd>
  • <sub id="fbfwxw957"><dl id="xcflci226"><u id="biaxtb429"></u></dl><strong id="jxljmg303"></strong></sub>

    首頁

    行業新聞

    木屑顆粒機在国外发展情况分析-88bf必发娱乐

    來源:必发bf88唯一官网 发布时间:2016-11-10 10:30 浏覽次數:
    木屑顆粒機是將各種生物質資源包括鋸末、稭稈、稻殼等農林廢棄物通過加壓、加熱由原來的松散原料壓縮成具有一定形狀和密度的成型燃料的技術。生物質壓縮成型技術的應用與發展,是因爲一般農作物稭稈都具有疏松、密度小、單位體積熱值低等缺點,作爲燃料使用很不方便。這是造成人們不願用稭稈作爲燃料的主要原因之一。稭稈生物質成型技術不僅能有效地解決這一問題,而且能有效地改變稭稈的燃燒特性。原料擠壓成型後,密度可達0.8~1.3t/m3,能量密度與中質煤相當,燃燒特性明顯改善,火力持久,黑煙少,爐膛溫度高,且儲存、運輸和使用方便,幹淨衛生,可代替礦物能源用于生産和生活領域。因此,作爲生物質轉化的重要手段和方法,壓縮成型技術越來越受到人們的重視,專業生産生物質顆粒燃料成型機械設備,同時我們還大量小農作物稭稈顆粒燃料和純木屑顆粒燃料。
    Sawdust pellet machine is to all kinds of biomass resources including sawdust, straw, rice husk and forestry waste by pressure and heat from loose material compressed into certain shape and density of the molding fuel technology. Biomass compression molding technology application and development, because the average crop straw is loose, small density, low calorific value per unit volume is shortcomings, used as a fuel. This is caused by people don't want to use one of the leading causes of straw as a fuel. Straw biomass molding technology can not only effectively solve the problem, and can effectively change the combustion characteristic of the straw. Raw material after extrusion, the density of 0.8 ~ 1.3 t/m3, the energy density intermediate coal and its combustion characteristic, fire durable, black smoke less, furnace temperature is high, and the storage, transportation and easy to use, the clean health, can replace the fossil energy used in production and living fields. Therefore, as an important means and methods of biomass conversion, compression molding technology is more and more get the attention of the people, specializing in the production of biomass pellet fuel molding machinery and equipment, at the same time we have a large number of small crop straw pellet fuel and pure sawdust pellet fuel.
    生物質燃料顆粒的生産和使用,在發達國家和地區正在蓬勃發展,在國內也已引起了高度的重視。由于生物質的可再生性,以及低硫、低氮、少灰、零二氧化碳排放等優良特性,木質顆粒燃料的生産和使用在歐洲、北美、日本等地已有30多年的曆史,現在的年生産和消費量已達到800萬噸以上,主要用作民用和工業鍋爐燃料,進行供熱,甚至發電。
    The production and use of biomass fuel particles, is booming in the developed countries and regions, at home also has caused a high degree of attention. Because of renewable biomass, and low sulfur, low nitrogen and low ashes, zero carbon dioxide emissions and other excellent features, the production and use of wood pellet fuel in Europe, North America, Japan and other places has a history of more than 30 years, now in the production and consumption has reached more than 8 million tons, mainly used for civil and industrial boiler fuel, heating, and even generate electricity.
    生物质颗粒燃料的生产技术主要有两种方式,一种是热压缩挤压成型技术,另一种是高压模腔成型技术。热压缩成型工艺一般由原料预处理——干燥——加温挤压——冷却几个环节组成,其中挤压技术常采用螺杆——模孔挤压成型,或压辊——环模孔挤压成型,或对辊环模挤压成型。这种工艺的设备多,系统复杂,能耗高,燃料生产成本高。另一种技术流派是采用对模腔加载高压,使模腔内的生物质原料受压成型的技术,一般用液压作动力,推动活塞,给成型模具加压,压制块状或棒状燃料。这种工艺的压力高达1 00MPa,能耗大,模具的磨损严重,生产效率低,燃料的燃烧速率比颗粒燃料低。上述无论哪种工艺,都要求进入压缩设备的粉状原料的含水率为10%~20%。因为需要对原料进行集中干燥,因此生产设备是固定的,采用工厂化生产方式。
    Biomass pellet fuel production technology mainly has two ways, one is a hot compression extrusion molding technology, the other is a high pressure cavity forming technology. Hot compression molding process generally by pretreating - dry - heat extrusion - cooling of several links, including screw extruding technology often USES - die extrusion forming, or roller pressure, ring die extrusion forming, or on the roller ring die extrusion. The process of equipment, the system complex, high energy consumption, fuel production cost is high. Another genre is used for the cavity loaded high pressure, the mould cavity of biomass compression molding technology, general use hydraulic power, moves the pistons, molding pressure, pressing block or fuel rod. The process of pressure up to 1 00 mpa, large energy consumption, mould wear serious, the production efficiency is low, fuel burning rate is lower than pellet fuel. Whatever the process above, are required to enter compression equipment powder raw material moisture content was 10% ~ 20%. Because need to concentrate drying of raw materials, production equipment is fixed, therefore, USES the factory production mode.
    爲了克木屑顆粒機設備系統複雜、能耗高的缺點,國內外近些年來在生物質的成型技術方面作了艱苦的探索性研究。雖然我國遼甯能源所、西北農大、河南農大、南京林科所、廣州林科所等機構對生物質固化成型燃料的開發已有20多年的曆史,但是沒有突破國際上主流技術的框框。
    In order to overcome the sawdust pellet machine equipment system is complex, the shortcomings of high energy consumption, both at home and abroad in recent years in biomass forming technology for hard exploratory study. Although liaoning energy in China, the northwest nongda Lin Kesuo, henan agricultural university, nanjing, guangzhou Lin Kesuo institutions such as the development of biomass curing fuel has more than 20 years of history, but there is no breakthrough in the international mainstream technology on the box.

    上一篇:为什么要发展生物質顆粒機能

    下一篇:精確性木屑造粒機也不擔保該消息的

    相關産品

    更多>>
    平模顆粒機 平模顆粒機
    小型顆粒機 小型顆粒機
    稭稈壓塊機 稭稈壓塊機
    稭稈顆粒機 稭稈顆粒機
    滾筒烘幹機 滾筒烘幹機
    木材粉碎機 木材粉碎機
    ?